Fasteners  standard (DIN German standard, GB GB, ASME / IFI / ANSI American  standard, Q standard, PEM standard, JB standard mechanical department,  EN European standard, ISO international standard, JIS standard, HG  chemical standard, NFE method Standard, UNI Italian standard, BS British standard, other commonly used standards
 

National standard
Fasteners - Marking methods GB / T 1237-2000

GB / T 152.1-1988 Fasteners - Through Hole for rivets

Fastening countersunk countersunk countersunk countersunk head

Fasteners - Countersink for cylindrical head GB / T 152.3-1988

Fasteners - Hex head bolts and countersunk nuts for hexagon nuts GB / T 152.4-1988

Thread cross - sectional area and load - bearing area of threaded fasteners GB / T 16823.1-1997

General rules for fastening of threaded fasteners GB / T 16823.2-1997

Test method for tightening of threaded fasteners GB / T 16823.3-1997

Fasteners - General technical conditions for bolts, screws, studs and nuts GB / T

GB 17464-1998 Safety requirements for threaded and non-threaded clamping parts for connecting copper conductors

GB / T 17645.511-2010 Industrial automation systems and integrated  part libraries - Part 511: Mechanical systems and common parts:  Fasteners - Reference dictionaries GB / T 2670.1-2004 Hexagon socket  head

Fasteners - Mechanical properties - Bolts, screws and studs GB / T 3098.1-2000

GB / T 3098.10-1993 Fasteners - Mechanical properties - Bolts, screws, studs and nuts made of non - ferrous metals

Mechanical properties of fasteners - Self - drilling tapping screws GB / T 3098.11-2002

Fasteners - Mechanical properties - Nut - Cone - guaranteed load test GB / T 3098.12-1996

GB / T 3098.13-1996 Mechanical properties of fasteners Torque test and  breaking torque of bolts and screws Nominal diameter 1 to 10 mm

Fasteners - Mechanical properties - Loose reaming test GB / T 3098.14-2000

Fasteners - Mechanical properties - Stainless steel nuts GB / T 3098.15-2000

Fasteners - Mechanical properties - Stainless steel locking screws GB / T 3098.16-2000

GB / T 3098.17-2000 Mechanical properties of fasteners - Hydrogen  embrittlement with preload test Parallel bearing surface method

Fasteners - Mechanical properties - Blind rivets - Test methods GB / T 3098.18-2004

Fasteners - Mechanical properties - Core pulling rivets GB / T 3098.19-2004

Mechanical properties of fasteners - Coarse thread of nuts GB / T 3098.2-2000

Fasteners - Mechanical properties - Butterfly nuts - Torque protection GB / T 3098.20-2004

 Fasteners - Mechanical properties - Stainless steel tapping screws GB / T 3098.21-2008

Fasteners - Mechanical properties - Fine - grained non - quenched and tempered steel - Bolts, screws and studs GB / T 3098.22

Fasteners - Mechanical fasteners - Fastening screws GB / T 3098.3-2000

Fasteners - Mechanical properties - Nuts - Threads

Fasteners - Mechanical properties - Self - tapping screws GB / T 3098.5-2000

Fasteners - Mechanical properties - Stainless steel bolts, screws and studs GB / T 3098.6-2000

Fasteners - Mechanical properties - Self - tapping screws GB / T 3098.7-2000

Mechanical properties of fasteners - Thread connection for heat resistance GB / T 3098.8-1992

Fasteners - Mechanical properties - Effective torque - Type hexagon socket nuts GB / T 3098.9-2002

Fasteners - Terminology - Thread fasteners, pins and washers GB / T 3099.1-2008

Fasteners - Terminology - Blind rivets GB / T 3099.2-2004

Fasteners - Tolerances bolts, screws, studs and nuts GB / T 3103.1-2002

Fasteners - Tolerances for bolts, screws and nuts for precision machinery GB / T 3103.2-1982

GB / T 3103.3-2000 Fastener tolerances Flat washers

Fasteners - Tolerances for thermal connections for heat resistance GB / T 3103.4-1992

Fasteners - Hexagonal width of hexagonal products GB / T 3104-1982

Fasteners - Electroplated coatings GB / T 5267.1-2002

Fasteners - Non - electrolytic zinc sheet coating GB / T 5267.2-2002

Fasteners - Hot - dip galvanized coatings for fasteners GB / T 5267.3-2008

Fasteners - Surface treatment - Corrosion - resistant stainless steel passivation treatment GB / T 5267.4-2009

Fasteners - Bolts, screws, studs and nut sizes - Code and marking GB / T 5276-1985

Fasteners - Bolts and screws - Through - holes GB / T 5277-1985

Fasteners - Opening pin holes and wire holes GB / T 5278-1985

Fasteners - Surface imperfections - Bolts, screws and studs - General requirements GB / T 5779.1-2000

Fasteners - Surface imperfect nuts GB / T 5779.2-2000

Fasteners - Surface imperfections - Particular requirements for bolts, screws and studs GB / T 5779.3-2000